Sysmex All models error codes
Codes
- A-1Error codeP3Medium
- DCError codeDC Converter generates the power for the LCD(VEE). The voltage can be adjusted by VR forHigh
- ERR32Error codeCoagulation was not detectedCritical
- ERR64Error codeThe pipette guide was opened during photo detection, or reagent was not added within the allowed time. Or, the analysis start switch was pressed again before analysis completion but after starting the analysisMedium
- ERR100Error codeVariation of reaction curve is extremely high. This error message may indicate that the PT result was <7 seconds, or the APTT result was <15 seconds, or the Fbg result was <3 secondsCritical
- PU-17Error codeSupplies positive/negative pressure to the instrumentMedium
- ter10Error codeExplains how to preset the instrument's various settings, such as the data measure settings (including limits that indicate abnormal data) and the test protocol settingsMedium
- TER11Error codeExplains how to set date, time, units, sample analysis stop and other system conditions. Also contains data analysis settings -- for abnormal data judgments, etcMedium
- to3Error codeWhen an error occurs, sends NAK (15H)Medium