DAF Tüm modeller 01-33 kodu

Anlamı

The pressure sensor does not detect an increase in pressure during the pump cycle: - Insufficient amount of grease in the reservoir - Break in the connection in the main line of the lubrication system - Air in the system - Breakage of the pressure sensor - Open circuit at pin 2 of the electronic control unit

Olası nedenler

- Oil does not flow to lubrication points - The display activates the AGS warning

Tüm modeller için diğer kodlar

• 0-0Internal communication failures in the electronic control unit ( D 901) due to a malfunction of the electronic control unit
• 0-1Internal communication failures in the electronic control unit ( D 901) due to a malfunction of the electronic control unit
• 01-02Internal communication failure due to CDM malfunction
• 01-34The sensor detects an increase in pressure before the start of the pump cycle : - Short circuit of the pressure sensor - Short to ground at terminal 2 of the electronic control unit
• 02-03Short circuit to supply power to the pump of the automatic lubrication system at terminal 4 of the electronic control unit
• 02-05Open circuit in the pump of the automatic lubrication system: - Open circuit at terminal 4 of the electronic control unit - Open circuit at terminal 9 of the electronic control unit
• 02-12Internal failure due to CDM failure
• 03-05