DAF Tüm modeller 08-09 kodu

Anlamı

FMS - CAN malfunction : - Open circuit at the output of the WHO electronic control unit - Open circuit at terminal B06 of the electronic control unit - Short circuit in the CAN - H and CAN - L buses - Short to ground in the CAN bus - H - Short to ground in the CAN bus - L

Olası nedenler

- The control system is not receiving data

Tüm modeller için diğer kodlar

• 1-0Fault on starting ACH - EW , no flame detected during startup. The flame sensor value remains below 80 ° C, the voltage at terminals 10 and 12 of the 18-pin connector from the bottom of the electronic control unit below 2.23 V: - Lack or insufficient fuel supply - Insufficient air supply - Clogged exhaust - Dirty or damaged igniter - Too high or too low sparking voltage
• 04-12Internal failure due to CDM failure
• 05-03Too high voltage (above 36 V) at terminal A1 of the electronic control unit: - Excessive generator / battery voltage
• 05-04Too low voltage (below 16 V) at terminal A1 of the electronic control unit: - Generator voltage too low - Open circuit at terminal A1 of the electronic control unit
• 06-03Too high voltage (above 36 V) at terminal A2 of the electronic control unit: - Excessive generator / battery voltage
• 09-09Malfunction of the V - CAN CAN - L bus due to a short to ground in CAN - L
• 10-0Excessive rise in coolant temperature: - Poor fluid flow - Lack of coolant - Using an intarder
• 10-09Failure of the CAN bus of the trailer due to a short circuit of CAN - H and CAN - L