Arıza kodu
Epson Tüm modeller 7 kodu
Tehlike düzeyiOrta
- Düşük
- Mevcut seviye:Orta
- Yüksek
- Kritik
Anlamı
Four digits
Anlamda hata mı var? Düzeltme önerinOlası nedenler
Error
Nedenlerde hata mı var? Düzeltme önerinÇözüm
Çözüm adımları üyelere açıktır ve bu sayfada gösterilmez. Soruları yanıtlayıp çözümü açabilirsiniz.
Tüm modeller için diğer kodlar
- 4■ Do not remove the connector plate forcibly. Removing the connector plate forcibly may result in damage to the cables, disconnection, and/or contact failure. Damaged cables, disconnection, or contact failure is extremely hazardous and may result in electric shock and/or improper function of the robot system. ■ When installing the connector plate, be careful not to allow the cables to interfere with the plate mounting and do not bend these cables forcibly to push them into the cover. Unnecessary strain on cables may result in damage to the cables, disconnection, and/or contact failure. Damaged cables, disconnection, or contact failure is extremely hazardous and may result in electric shock and/or improper function of the robot system. When routing the cables, observe the cable locations after removing the connector plate. Be sure to place the cables back to their original locations
- 5■ Do not remove the connector sub plate forcibly. Removing the connector sub plate forcibly may result in damage to the cables, disconnection, and/or contact failure. Damaged cables, disconnection, or contact failure is extremely hazardous and may result in electric shock and/or improper function of the robot system. ■ When installing the connector sub plate, be careful not to allow the cables to interfere with the plate mounting and do not bend these cables forcibly to push them into the cover. Unnecessary strain on cables may result in damage to the cables, disconnection, and/or contact failure. Damaged cables, disconnection, or contact failure is extremely hazardous and may result in electric shock and/or improper function of the robot system. When routing the cables, observe the cable locations after removing the connector sub plate. Be sure to place the cables back to their original locations
- 400WMaintenance parts
- 627Suitable cord (Length about 800 mm)
- 750Maintenance parts
- A3Failure in firmware updating
- A3957SIC4,5
- A6627SIC6
Bu sayfanın adresi: https://remfixit.ekalfa.com/tr/epson/tum-modeller/7