Ergoline Tüm modeller 0220 kodu

Anlamı

System message: HP fan fault. Fan blocked or defective. Fan-speed PCB defective

Olası nedenler

System message: HP fan fault. Fan blocked or defective. Fan-speed PCB defective

Tüm modeller için diğer kodlar

• 0210System message: Undervoltage.
• 0211Lamp temperature > 70°C
• 0212System message: Supply-air temperature sensor. Displayed if the sensor temperature exceeds 45 °C for more than 3 minutes. Possible causes: defective/not connected PCB; intermittent contact/cable break; unit overheating (supply filter soiled)
• 0213System message: Lamp temperature > room temperature + 30 °C. Insufficient intake-air temperature. Lamps too powerful for the unit. Device overheating. Exhaust-air problems
• 0301System message: Watchdog controller. Watchdog controller defective or communication to main controller interrupted. Auxiliary controller not responding. Control board defective
• 0302System message: Device pass fault. Communication from the control board to the device-pass board is disturbed. Defective device-pass board. Missing device-pass board. Blank device-pass board. Problems with card slot (dust, damaged holder). Device software too old. Control board defective; watchdog board defective
• 0303System message: Heating controller. Extension controller has no communication with the bus system. Defective or not connected board. Bus communication faulty
• 0304System message: Controller - facial-tanner fan board. Controller defective or communication to main controller interrupted. Defective or not connected board. Bus communication faulty (e.g. due to a defective board)