Guide Tüm modeller RF3 kodu

Anlamı

and mobile RF communications devices should not be used closer to any part of LU M6 ENDERMOLAB i, including its cables, than the recommended separation , calculated from the applicable equation on transmitter frequency. ended separation distance: P P 80 MHz at 800MHz P 800 MHz at 2.5 GHz is the transmitter’s maximum power output in watts (W), according to the ter’s manufacturer, and d is the recommended separation distance in meters (m). strength for fxied RF transmitters, as determined by an electromagnetic survey should be less than the conformity level for each range of frequencies b. nce may be produced near the device marked with the following symbol

Olası nedenler

and mobile RF communications devices should not be used closer to any part of LU M6 ENDERMOLAB i, including its cables, than the recommended separation , calculated from the applicable equation on transmitter frequency. ended separation distance: P P 80 MHz at 800MHz P 800 MHz at 2.5 GHz is the transmitter’s maximum power output in watts (W), according to the ter’s manufacturer, and d is the recommended separation distance in meters (m). strength for fxied RF transmitters, as determined by an electromagnetic survey should be less than the conformity level for each range of frequencies b. nce may be produced near the device marked with the following symbol

Tüm modeller için diğer kodlar

• SPR11B CELLU M6 ENDERMOLAB i may be used in all establishments, including domestic sites and sites that are directly connected A to the low voltage public power grid, which supplies domestic buildings. orms