Sharp Tüm modeller 049-700 kodu

Anlamı

Probable causes are as follows: 1. The output destination was changed to the Finisher Output Tray although you selected the High Capacity Stacker. because the tab paper cannot be output to the stacker. 2. The output destination was changed to the Finisher Output Tray although you selected the High Capacity Stacker, because the loaded paper is smaller than the supported paper size for outputting to the stacker. 3. The stacker is not connected correctly or it is defective

Olası nedenler

Probable causes are as follows: 1. The output destination was changed to the Finisher Output Tray although you selected the High Capacity Stacker. because the tab paper cannot be output to the stacker. 2. The output destination was changed to the Finisher Output Tray although you selected the High Capacity Stacker, because the loaded paper is smaller than the supported paper size for outputting to the stacker. 3. The stacker is not connected correctly or it is defective

Tüm modeller için diğer kodlar

• 049-287A malfunction occurred in the High Capacity Stacker
• 049-288A malfunction occurred in the High Capacity Stacker
• 049-310A malfunction occurred in the High Capacity Stacker
• 049-500An error occurred during writing to ROM of the High Capacity Stacker
• 058-349An error occurred in the fusing unit
• 058-350An error occurred in the fusing unit
• 062-277A communication error occurred between the document scanning unit and the document feeder
• 071-210Tray 1 malfunction