Sysmex Tüm modeller TER11 kodu

Anlamı

Explains how to set date, time, units, sample analysis stop and other system conditions. Also contains data analysis settings -- for abnormal data judgments, etc

Olası nedenler

Explains how to set date, time, units, sample analysis stop and other system conditions. Also contains data analysis settings -- for abnormal data judgments, etc

Tüm modeller için diğer kodlar

• A-1P3
• DCDC Converter generates the power for the LCD(VEE). The voltage can be adjusted by VR for
• ERR32Coagulation was not detected
• ERR64The pipette guide was opened during photo detection, or reagent was not added within the allowed time. Or, the analysis start switch was pressed again before analysis completion but after starting the analysis
• ERR100Variation of reaction curve is extremely high. This error message may indicate that the PT result was <7 seconds, or the APTT result was <15 seconds, or the Fbg result was <3 seconds
• PU-17Supplies positive/negative pressure to the instrument
• ter10Explains how to preset the instrument's various settings, such as the data measure settings (including limits that indicate abnormal data) and the test protocol settings
• to3When an error occurs, sends NAK (15H)