Veichi servo-manual arıza kodları
Kodlar
- BF4Arıza koduHardware over-currentOrta
- C10Arıza koduOut of control alarmOrta
- C90Arıza koduEncoder communication failure: line-brokenOrta
- C91Arıza koduAbnormal encoder communication position data accelerationOrta
- CA0Arıza koduAbnormal encoder parametersOrta
- D00Arıza koduExcessive position deviationOrta
- D02Arıza koduExcessive position deviation alarm caused by speed limit during servo ONOrta
- Fn000Arıza koduDisplay alarm recordOrta
- Fn001Arıza koduClear alarm recordOrta
- Fn103Arıza koduCurrent offset automatic adjustmentOrta
- Fn104Arıza koduCurrent offset manual adjustmentOrta
- L3Arıza koduelay Drive Voltage Temp sampling saYüksek
- Pn101Arıza kodu！ The command smart setting starts with the current speed loop gain (Pn101) as a reference. If vibration occurs at the start of the adjustment, correct adjustment Cautions cannot be performed. In this case, lower the speed loop gain (Pn101) until the vibration disappears, and then readjustOrta
- Pn310Arıza koduAcceleration of the set speed from 0r/min to the rated speed (corresponding to the motor model). When the given speed is greater or less than the rated speed, the actual acceleration time is calculated in proportionOrta
- Pn311Arıza koduAcceleration time of the set speed from 0r/min to the rated speed (corresponding to the motor model). When the given speed is greater or less than the rated speed, the actual acceleration time is calculated in proportionOrta
- Pn605Arıza kodu0x04: Alarm clearOrta