Yaskawa VZA CPF00 kodu

Anlamı

* The following faults are not recorded in the error log: CPF00, 01, 02, 03, UV1, and UV2

VZA için diğer kodlar

• A1-03Inicializar parámetros
• b1-010:Operatör - d1-†† değerleri 1:Analog giriş A1 veya A2 2:Seri Haberleşme - RS-422/485 3:Opsiyon kartı 4:Puls Giriş (Terminal RP)
• b1-020:Operatör - RUN ve STOP tuşları 1:Terminaller - Dijital Girişler 2:Seri Haberleşme - RS-422/485 3:Opsiyon kartı bağlı
• b2-02Sets the DC Injection Braking current as a percentage of the drive rated current. In OLV the DC excitation current is determined by E2-03
• E1-01Input Voltage
• E1-04For a linear V/f characteristics, set the same values for E1-07 and E1-09. In this case, the set- ting for E1-08 will be disre- garded. Ensure that the four frequencies are set according to these rules or OPE10 fault will occur: E1-04 ≥ E1-06 ≥ E1-07 ≥ E1-09
• E1-05Max. Out- put Voltage
• E1-07Tension de sortie (E1-05) (E1-13) (E1-08) (E1-10) (E1-09) (E1-07) (E1-06) (E1-04) Fréquence de sortie

CPF00 kodu diğer Yaskawa modellerinde

• CPF00Tüm modellerDigital Operator Transmission Error 1
• CPF00CIMR-F7UOperator Communication Fault Transmission between the Drive and the Digital Operator was not established within 5 seconds after supplying power