Error code
Ghibli endüstriyel süpürge Error-Codes code U-56
Hazard levelHigh
- Low
- Medium
- Current level:High
- Critical
For your safety
This fault is rated high and involves an area that affects personal safety. No remote repair or do-it-yourself instructions are given; do not use the appliance or try to open or repair it.
Hazard area: mains voltage
Do not use the appliance and call an authorised service. If there is a risk to life, move to a safe place and see the emergency numbers.
The emergency numbers here are for Turkey. If you are outside Turkey, call your local emergency number.
No approved translation for this record yet; showing the original text.
Meaning
No description has been added for this code yet.
Found an error in the meaning? Suggest a correctionPossible causes
1. Verify the integrity of the motor discharge resistor and the Earth ground. Please refer to ST-112R* 2.
Found an error in the causes? Suggest a correctionSolution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Other codes for Error-Codes
- U-09Inverter parameters are not recognized- Inverter has to be able to talk with the microprocessor. Loading parameters allows this communication
- U-39Inverter fault- Fault in inverters internal control
- U-41Inverter to motor fault - A fault in one of the three inverter/ motor output phases
- U-50Short detected in the motor windings- A short in the motor or motor winding. This could be a short phase to phase, phase to housing, or phase to klixon
- UA11Open phase error- Loss of motor phase during operation Motor not connected- Motor disconnected during operation
- UA13ADC hardware error- Inverter has failed Electronic circuit error- Internal component of the inverter is damaged Inrush current failure- Inverter has failed
- UA14Over current diversion- Inverter is detecting an over current situation
- UA16Inverter overcurrent error-
Address of this page: https://remfixit.ekalfa.com/tr/ghibliendustriyelsupurge/errorcodes/u56