Error code
Immergas Victrix 26 2 I code d9
Hazard levelHigh
No approved translation for this record yet; showing the original text.
Meaning
Displays the list of the last fvi e anomalies.
Found an error in the meaning? Suggest a correctionPossible causes
Displays the list of the last fvi e anomalies.
Found an error in the causes? Suggest a correctionSolution
Solution steps are not shared for faults that may be dangerous.
No do-it-yourself solution is given for this fault. For your safety, call an authorised service.
Other codes for Victrix 26 2 I
- d2Displays the primary exchanger output instant heating fol w temperature
- d3Displays the instant output temperature from the DHW exchanger
- d6Displays the external temperature (if external probe present) If the temperature is below zero, the value is displayed fal shing
- d7Display the temperature of the inlet DHW (with DHW inlet probe present)
- M1Boiler pump
- M303-way valve (motorised)
- P0Establishes the switch-of fmethod in DHW mode. 1 Correlated: the boiler switches off on the basis of the temperature set.
- P2The pump can function in two ways. 0 intermittent: In winter "mode" the pump is managed by the room thermostat or by the remote control 1 continuous: In "winter" mode the pump is always powered and so functions continuously
Code d9 on other Immergas models
Address of this page: https://remfixit.ekalfa.com/tr/immergas/victrix262i/d9