JCB All models error codes
Codes
- 1-3Error codeExcavator ValveHigh
- 2-3Error code4 Depress clips B and lift off cover C. Take care not to tap or knock the element. 6 Insert the new elements into the canister, pushing them firmly in so that seals G and K are fully seated. On turbocharged engines, assemble the pulsation ring L into the cover, making sure that tongue M fits into slot N. Fit cover C with dust valve J at the bottom. Note: Pulsation ring L is not fitted in this application. 7 Refit the induction hose to stub pipe A. C J D L N M N C B J M S257910High
- 10-1Error codeFault FindingHigh
- 10-2Error codeFault FindingHigh
- 10-3Error codeFault FindingHigh
- 10-4Error codeFault FindingHigh
- 10-5Error codeFault FindingHigh
- 10-6Error codeFault FindingHigh
- 10-7Error codeFault FindingHigh
- 10-8Error codeFault FindingHigh
- 15-1Error codeFault FindingHigh
- 15-2Error codeFault FindingHigh
- 15-3Error codeIntroduction The purpose of this section is to help you trace hydraulic faults to a faulty unit (valve, actuator, ram etc). To help identify circuits, valves, rams etc mentioned in the fault finding procedures, refer to the hydraulic schematic diagrams (near the beginning of the Hydraulics Section). 1 Before you begin fault finding, read the Safety information at the beginning of this manual. 2 Make simple checks before say, stripping a major component. 5 Make any relevant electrical checks before moving on to the hydraulics. It may be part of a component from elsewhere in the circuit.High
- 15-4Error codeFault FindingHigh
- 15-10Error codeFault FindingHigh
- 15-11Error codeFault FindingHigh
- 15-12Error codeFault FindingHigh
- 27-1Error codeHose Burst Protection Valve (if fitted)High
- 30-1Error codeMain PumpHigh
- 31-1Error codeMain PumpHigh
- 31-2Error codeMain PumpHigh
- 31-3Error codeMain PumpHigh
- 31-4Error codeMain PumpHigh
- 35-1Error codeMain PumpHigh
- 35-2Error codeMain PumpHigh
- 35-3Error codeFault FindingHigh
- 36-1Error codeFault FindingHigh
- 36-2Error codeFault FindingHigh
- 40-1Error codeStarter MotorHigh
- 40-2Error codeStarter MotorHigh
- 40-9Error codeFault FindingHigh
- 45-1Error codeSteer Mode ValveHigh
- 45-2Error codeSteer Mode ValveHigh
- 50-1Error codeLoader Valve - Fixed FlowHigh
- 50-6Error codeLoader Valve - Fixed FlowHigh
- 50-7Error codeLoader Valve - Fixed FlowHigh
- 50-8Error codeLoader Valve - Fixed FlowHigh
- 50-9Error codeLoader Valve - Fixed FlowHigh
- 50-10Error codeLoader Valve - Fixed FlowHigh
- 50-11Error codeLoader Valve - Fixed FlowHigh
- 50-12Error codeLoader Valve - Fixed FlowHigh
- 50-13Error codeLoader Valve - Fixed FlowHigh
- 50-14Error codeLoader Valve - Fixed FlowHigh
- 50-15Error codeLoader Valve - Fixed FlowHigh
- 50-16Error codeLoader Valve - Fixed FlowHigh
- 50-17Error codeLoader Valve - Fixed FlowHigh
- 50-24Error codeLoader Valve - Fixed FlowHigh
- 50-25Error codeLoader Valve - Fixed FlowHigh
- 50-26Error codeLoader Valve - Fixed FlowHigh
- 50-27Error codeLoader Valve - Fixed FlowHigh