Case Tüm modeller E06 kodu

Anlamı

Trouble reception in indoor-outdoor communication (dropping out of indoor unit)

Olası nedenler

Trouble reception in indoor-outdoor communication (dropping out of indoor unit)

Tüm modeller için diğer kodlar

• dC6-13Current values of the network data points (as configured). Data point 1 (Code 6) is generally the humidity sensor and its value is obtained from the Control- ler once every minute
• E01Indoor-remote controller communication trouble (detected at remote controller end)
• E03Communication from remote controller or network adaptor has been lost (so has central control communication)
• E04Trouble or poor contact in wiring between indoor and outdoor units (loss of indoor-outdoor communication)
• E07Signal cannot be transmitted to indoor units ( indoor units left without communication from outdoor unit)
• E09Both remote controls have been set as master remote control in two remote control (alarm and shutdown for header unit and continued operation for follower unit)
• E10Communication trouble between main MCU and the motor microcomputer MCU
• E11Communication check code between Application control kit and indoor unit P.C. board