Case Tüm modeller E10 kodu

Anlamı

Communication trouble between main MCU and the motor microcomputer MCU

Olası nedenler

Communication trouble between main MCU and the motor microcomputer MCU

Tüm modeller için diğer kodlar

• E04Trouble or poor contact in wiring between indoor and outdoor units (loss of indoor-outdoor communication)
• E06Trouble reception in indoor-outdoor communication (dropping out of indoor unit)
• E07Signal cannot be transmitted to indoor units ( indoor units left without communication from outdoor unit)
• E09Both remote controls have been set as master remote control in two remote control (alarm and shutdown for header unit and continued operation for follower unit)
• E11Communication check code between Application control kit and indoor unit P.C. board
• E16Too many indoor units connected / overloading
• E17There is no communication from FS unit(s)
• E18Periodic communication between indoor header and follower units cannot be maintained