Yaskawa CIMR-F7U OL2 kodu

Anlamı

Drive Overload The Drive output current exceeded the Drive’s overload curve

Olası nedenler

The load was too large, or the accel/decel times are too short

CIMR-F7U için diğer kodlar

• OH2Drive overheat alarm signal is input from a multi-function digital input terminal S3-S8 (H1-01 to H1-06) that is programmed for B: overheat alarm
• OH3Motor Overheating 1 Detected when A2 or A3, programmed for motor temperature (H3-09 or H3-05 = E), exceeds 1.17V for time L1-05 and L1-03 = 0 to 2
• OH4Motor Overheating 2 Detected when A2 or A3, programmed for motor temperature (H3-09 or H3-05 = E), exceeds 2.34V for time L1-05 and L1-03 = 0 to 2
• OL1Motor Overload Detected when L1-01 = 1 to 3 and the Drive’s output current exceeded the motor overload curve. The overload curve is adjustable using parameter E2-01, L1-01, and L1-02
• OL3Overtorque Detection 1 Drive output current > L6-02 for more than the time set in L6-03 and L6-01 = 3 or 4
• OL4Overtorque Detection 2 Drive output current > L6-05 for more than the time set in L6-06 and L6-04 = 3 or 4
• OPE01Drive kVA Setting Error
• OPE03Multi-function Input Selection Error

OL2 kodu diğer Yaskawa modellerinde

• oL2Tüm modeller150% of drive rated Heavy Duty current for 60 s
• oL2CIMR-JC60 saniye için sürücü anma akımının %150'si
• oL2CIMR-VC60 saniye için sürücü anma akımının %150'si