Yaskawa CIMR-F7U OL4 kodu

Anlamı

Overtorque Detection 2 Drive output current > L6-05 for more than the time set in L6-06 and L6-04 = 3 or 4

Olası nedenler

Motor was overloaded

CIMR-F7U için diğer kodlar

• OH4Motor Overheating 2 Detected when A2 or A3, programmed for motor temperature (H3-09 or H3-05 = E), exceeds 2.34V for time L1-05 and L1-03 = 0 to 2
• OL1Motor Overload Detected when L1-01 = 1 to 3 and the Drive’s output current exceeded the motor overload curve. The overload curve is adjustable using parameter E2-01, L1-01, and L1-02
• OL2Drive Overload The Drive output current exceeded the Drive’s overload curve
• OL3Overtorque Detection 1 Drive output current > L6-02 for more than the time set in L6-03 and L6-01 = 3 or 4
• OPE01Drive kVA Setting Error
• OPE03Multi-function Input Selection Error
• OPE05Run Command Selection Error The run command selection parameter b1-02 is set to 3 but no option board is installed
• OPE06Control Method Selection Error